一种新型超宽带紧耦合天线阵列设计

针对紧耦合天线阵列（Tightly Coupled Array,TCA）安装于飞机、导弹、舰船等平台时接地板严重影响其阻抗带宽的问题,将栅格形阻性频率选择表面与交指型偶极子天线单元相结合,设计了一种新型多层结构的超宽带TCA。采用CST对加载与未加载栅格形阻性频率选择表面时TCA的性能进行了比较分析。结果表明：未加载时,受接地板影响其最佳阻抗带宽（VSWR〈2）为4．5：1（2．1～9．5GHz）;加载后,TCA可克服接地板的影响,其阻抗带宽可达10．4：1（1．8～18．8GHz）。     

基于北斗的车载接收机航向测量技术研究

研究一种BD2双天线的双频基线测量算法,实现了在车载动态条件下利用BD2卫星进行载体航向实时测量,满足军用车辆、无人机、船舶舰艇等载体高精度、快速实时、连续稳定长时间工作、低成本的要求,对算法实现进行了试验验证,取得了理想的成效,具有较强的工程实用价值。     

Antenna pattern control of planar arrays for long distance communications

As an alternative to standard antennas and due to the advent of low-cost digital processors and materials, adaptive antenna arrays are increasingly considered for applications in long distance communications. The pattern beam control potentialities provide the performance improvement of the communication systems. In this context, this work presents a technique that permits to synthesize the antenna pattern of a planar array. Considering that the relationship between the array factor and the array excitations for the far field region is a Fourier transform in the appropriate variables, the non-uniform sampling procedure is extended for planar arrays. These arrays permit a further control of the antenna pattern since two dimensions of space are used. The technique considers a number of array factor points equal to the array size, which is used to impose appropriated values in the antenna pattern. The produced array factor passes through those points with the desired values, which allows the synthesis of antenna patterns with appropriated characteristics. The theory is presented in order to develop the necessary direct expressions to calculate the array excitation. The array factor can be obtained using the inverse Fourier transform. As application examples, with this technique it is possible to define the level of each sidelobe of the antenna pattern, to control the main beam and to impose nulls in prescribed directions of the pattern.     

用于基带雷达引信的平面等角螺旋天线的特性与设计

通常希望一个天线的波瓣图和阻抗能在一个较工的频率范围内保持不变。我们将这一类称为非频变天线。平面等角螺旋天线是一这一类天线的典型例子。本文主要叙述了平面等角螺旋天线的宽频带特性和工作原理，并简要介绍了它的设计方法。     

放映氙灯稳流及稳纹波电路研究

本文简要介绍了放映氙灯电源的现状,详细研究了由中国民航学院三维显示技术研究所最新研制成功的放映氙灯电源中的稳流及稳纹波电路的设计思想和工作原理。理论分析和实验结果表明,本文设计的稳流及稳纹波电路显著地提高了氙灯电源的可靠性及减小了氙灯电流的纹波系数且操作简便,利于推广应用。     

扇面波导中馈电探针输入电阻数值计算

推导出扇面波导中激励探针的等效输入电阻表达式，探针是伸入波导中的同轴线的内导体，在Ｘ波段，计算了输入电阻值随着探针伸入波导中不同长度的变化。     

大型星载天线桁架式可折展机构的模态分析

大型空间抛物柱面星载天线具有口径大、约束弱、刚度低、质量小等特点,其机构的空间稳定性直接决定天线的使用寿命和信息传输的可靠性。为准确获得大型空间星载天线在轨稳定性能参数,依据星载天线的高精度和长寿命的设计需求,提出一种新型抛物柱面星载天线结构形式,利用有限元仿真对该新型星载天线作模态分析,并分析相关参数。结果表明:采用Al7075材料的新型抛物柱面星载天线基频满足设计要求。同时,增加上下支杆和上下斜撑杆的截面尺寸可有效提高天线结构的固有频率。该研究为我国大型抛物柱面星载天线设计提供了理论支撑和技术参考。     

三轴陀螺稳定平台伺服回路全姿态解耦及变增益控制方法

在载体大机动飞行背景下，要求惯性平台具备全姿态的功能。国内现有的三轴陀螺稳定平台（简称三轴平台）不具备全姿态的功能，在内框架增加了限位挡钉以限制内框架角的工作范围，主要是基于内框架角不能工作在接近于?90?的认识。为了准确描述全姿态条件下三轴平台的运动规律，本文指出了传统动力学推导过程中的不足之处，重新建立了三轴平台的动力学模型，基于该模型给出了非奇异的全姿态伺服回路并提出了一种新的全姿态解耦方法，包括力矩解耦和转动惯量解耦。最后，针对转动惯量在框架转动过程中非定值的问题，提出了基于H∞控制理论的变增益控制策略。仿真结果表明，变增益控制器相对定常参数控制器可显著改善三轴平台伺服回路控制的性能。     

模块化空间可展开天线支撑桁架结构的热-结构分析

对模块化空间可展开天线支撑桁架结构进行空间热交变环境下的热 结构分析,为天线结构因热致变形影响形面精度和网面稳定性提供合理的防护建议。采用ANSYS APDL有限元软件建立了大口径模块化空间可展开天线支撑结构的精细化数值模型,基于已有试验分别验证了模块化可展开天线结构有限元建模和热分析模型的正确性;分析了在瞬态温度场作用下约束位置等参数对支撑桁架弦杆及拉索应力的影响和热致变形规律。研究结果表明：空间可展开天线结构的应力和变形随时间历程发展与瞬态温度场变化趋势基本一致;同一瞬态温度场下,天线结构中心模块拉索热应力最大,同圈模块的弦杆热应力幅值基本相同,其上弦杆热应力逐圈增大,而拉索热应力逐圈减小;天线结构热致变形在距离约束最远端处整体累计值最大,上层中心点处累计热致变形可达15mm左右,对天线形面精度的影响不可忽略;将天线支撑桁架结构最外侧且距离结构中心最近的模块顶角和与相邻模块竖杆拼接处作为星载天线伸展臂约束时,天线结构的热致变形最小。将该处作为模块化空间可展开天线的展开支点,并建议对天线支撑结构表面采用涂刷隔热防护复合材料涂层等防护措施,以增加天线结构在太空极端环境的适应性,从而减小温度交变对天线整体形变和网面精度的影响。     

Modelling ignition probability with pairwise mixing-reaction model for flame particle tracking

Reduced order models for ignition analysis can offer insights into ignition processes and facilitate the combustor optimization. In this study, a Pairwise Mixing-Reaction (PMR) model is formulated to model the interaction between the flame particle and the surrounding cell mixture during Lagrangian flame particle tracking. Specifically, the model accounts for the two-way coupling of mass and energy between the flame particle and the surrounding shell layer by modelling the corresponding turbulent mixing, chemical reaction and evaporation process if present. The state of a flame particle, e.g., burnt, hot gas or extinguished, is determined based on particle temperature. This model can properly describe the ignition process with a spark kernel being initiated in a nonflammable region, which is of practical importance in certain turbine engines and has not been rigorously accounted for by the existing models based on the estimation of local Karlovitz number. The model is integrated into an ignition probability analysis platform and is demonstrated for a methane/air bluff-body flame with the flow and fuel/air mixing characteristics being extracted from a non-reacting simulation. The results show that for the spark location being at the extreme fuel-lean outer shear layer of the recirculation zone, PMR can yield ignition events with a significant number of active flame particles. The mechanisms for the survival of the initial flame particles and the entrainment of the survived flame particles into the recirculation zone are analyzed. The results also show that the ignition probability map from PMR agrees well with the experimental observation: a high ignition probability in the shear layer of the recirculation zone near the mean stoichiometric surface, and low ignition probabilities inside the recirculation zone and the top stagnation region of the recirculation zone. The parametric study shows that the predicted shape of the ignition progress factor and ignition probability is in general insensitive to the model parameters and the model is adequate for quantifying the regions with high ignition probabilities.